3M Sun Control Films are designed to reduce the amount of solar heat transmission through window glass by increasing the solar reflection (not necessarily visible reflection) and solar absorption through the glass.
Typical colored or dyed films work primarily through increased absorption. The color absorbs the solar energy at the glass, thus reducing the direct transmission into the room. These films are not as effective as reflective films for reducing heat.
Reflective films are films that have been precision coated with metals. These metalized films are designed to increase the solar energy reflection of the glass. 3M Reflective Films range from moderate to excellent in solar performance (heat gain reduction).
All 3M Sun Control Films are made to be transparent and optically clear. The ultraviolet protection in the adhesive system is there to protect the adhesive, the metals, the polyester film, and the abrasion resistant coating from UV degradation. This UV protection will also help protect home and office furnishings.
Most 3M Window Films are protected with our patented abrasion resistant coating that provides long-term durability and maintained appearance.
How do 3M All Season (LE) Films work?
3M All Season Films, or Low E Films, work much in the same way as the Sun Control Films except that they offer an increased performance against cold weather heat loss. The patented construction of these films enables the metal coating to reflect more of the interior room heat back into the room where it is needed. This improves personal comfort by reducing drafts near windows, and can help save on fuel costs, especially in commercial buildings. The LE films are also protected with our abrasion resistant coating for long-term durability and maintained appearance.
Why do commercial customers have 3M Window Film applied to their buildings?
Lower heating and cooling operating costs
Lower utility demand costs
Improved tenant comfort
Improved aesthetics, uniform appearance
Improved safety and security
Extended A/C equipment life
Valued alternative to adding more A/C equipment
Most often, our commercial customers will purchase 3M Window Films for tenant comfort and justify the purchase through energy cost savings.
What is the typical energy pay back for 3M Window Films?
Simple paybacks will vary depending upon the amount of sunlit glass exposure, the type of film, the type of glass, cost of fuel, cost of application, and other variables. However, we have seen paybacks often range in the 2-5 year period, with some reported to be even less than 6 months. See your 3M Authorized Window Film Dealer to analyze the potential energy savings in your commercial property.
How is 3M Window Film applied?
3M Window Films are professionally applied by skilled, well-trained 3M Authorized Window Film Dealers. Almost all of our films are designed to be applied to the inside of your glass.
The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary.
Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges.
How long does it take for 3M Window Films to dry?
We suggest allowing thirty days for the film to fully dry and cure. During this curing process, it is normal to have small water bubbles and/or a hazy appearance. These will disappear as the film dries; depending upon the film type and weather conditions, drying may take as much as 30 (or even 45) days, or as little as a few days. Once dried, 3M Window Films will look great and perform for many years to come.
Can I install 3M Window Film myself?
No, 3M Window Films require professional application; our 3M Authorized Window Film Dealer/Applicators are thoroughly trained and experienced in performing high quality work. In this way, our customers will enjoy the benefits of 3M Window Films and have the comfort of the 3M warranty.
How do I clean my 3M Window Film?
After thirty (30) days, you may clean 3M Window Films using normal household cleaning solutions, including ammonia based products: e.g., Windex, and a soft, lint-free cloth or towel. You may also use a squeegee to clean the films. Abrasive products which would scratch or damage the film should not be used.
How long does 3M Window Film last?
3M Window Films are made to last for many years; just how long may depend upon the type of film applied, type of glass it is applied to and the particular climate in which it is applied. Most applications last upwards of ten (10) years and beyond, and several applications are still performing after fifteen (15) years. All applications have a minimum warranty period of ten (10) years (except exterior applications which are two (2) years), and several films carry a ten (10) year commercial warranty, and even a lifetime residential warranty.*
*(Lifetime for as long as original purchaser owns their home)
What is the warranty for 3M Window Film?
3M Window Films are warranted to maintain their solar properties without bubbling, peeling, cracking, or crazing. Many of our films are warranted against discoloration, too. (Those which do not use dyed polyesters). Should the product proved to be defective, 3M Company and the 3M Authorized Window Film Dealer will replace the film and provide the reapplication labor free of charge.
Seller also warrants against glass failure due to thermal shock fracture or seal failure (maximum value of $500 per window) caused only as a direct result of the application of 3M Window Films (or 3M Safety & Security Window Films) provided the film is applied to recommended types of glass and the glass failure is reported to the seller within the specified time (listed below) from the start of the installation.
Sixty (60) months coverage against thermal shock fracture Forty (40) months coverage against seal failure if covered by original window manufacturer
There is a consumer deductible of $25.00 (or 5% of the replacement cost, whichever is greater) per claim.
Any glass failure covered by this warranty must be reviewed by Seller prior to repair, and only covers film and glass replacement.
Optional Platinum Warranty - Residential Applications Only
The 3M Platinum Warranty matches the terms and conditions of the residential customer's existing window manufacturer's warranty for a mere $.35/square foot. This allows the customer continuous coverage on new windows and the peace of mind having assurance that a product from 3M is protecting their investment.
Do 3M Window Films cause glass to break?
The application of 3M Window Films will increase the temperature of your sunlit glass which will increase the stress on the glass edges. The quality of those glass edges and several other factors (external shading, interior shading, glass history, type of film, size/shape of glass, indoor/outdoor temperature) all contribute to the potential risk of glass breakage.
3M's thirty (30) years of experience with applying 3M Window Films to different types of glass enables us to make proper film/glass recommendations and minimize the potential for glass breakage. In addition, we support these recommendations with our 60-month glass breakage warranty against thermal shock fracture. Should the glass break within 60-months of application, 3M company; will replace the glass (maximum $500.00 with a $25.00 consumer deductible, or 5% of replacement cost, whichever is greater per claim), and the dealer will replace the film.
Do 3M Window Films cause seal failure when applied to insulated (double-pane, Thermopane) windows?
No, 3M Window Films do not cause seal failure. We've been applying 3M Window Films to insulated windows for over 30 years with several millions of square feet of film applied to date.
When recommended films are applied to the inside pane of an insulated glass unit, there will be some absorption (except with clear safety films) of the sun's energy, which will increase the temperature of the glass pane. Some of this heat will transmit to the airspace, slightly raising the airspace temperature. However, even a 20 F degree increase (unusual for most films) will result in a less than 3% change in air pressure, whereas properly made units are designed and tested to withstand 22% changes in air pressure.
Risk of seal failure is greatly determined by the quality of workmanship and the quality of the materials that go into building the insulated glass units. The best guard against seal failure is to purchase well-made units from reputable window manufacturers that have solid experience and histories with insulated units.
Will 3M Window Film stop my furnishings from fading?
Nothing completely stops fading. 3M Window Films are designed to help reduce the major causes of fading (ultra violet light, visible light, and solar heat), thus prolonging the life of your furnishings, perhaps as much as two to five times.
Keep in mind the article(s) to be protected; if they have a typical life of five (5) years then they may last ten (10) years to much longer depending on the performance of the film selected. However, if the typical life is only 2-3 weeks, then the expectation should be expressed in terms of months.
As a general rule of thumb, ultra violet (UV) is approximately 40% of the cause, visible light is about 25%, and heat about 25%. The remaining 10% can be attributed to humidity, pollutants, interior lights, dye stability, and more.
Does the Ultra Violet protection lose its effectiveness over time?
No, the ultra violet (UV) protection that we use in our proprietary adhesive system is indefinite. It does not lose its effectiveness over time. In fact, we tested an actual glass sample from The Dumbarton House, Washington, DC. This was a ten (10) year old application and the ultra violet transmission still measures <1%!
How do 3M Safety and Security Window Films work?
3M Safety and Security Window Films are designed to make glass shatter-resistant by holding the glass pieces together when broken.
Compared to 3M films, 3M Window Films are made with thicker polyester and a much thicker, more aggressive adhesive, 3M Safety & Security Films are unique in the industry; they are built using a special micro-layered polyester technology which increases the films' tear resistance significantly. Pound for pound, the impact and tear resistance of Safety & Security films outperform all other films of similar thickness.
Are 3M Safety & Security Window Films hurricane-proof? Bullet-proof? Burglar-proof?
No, 3M Safety & Security Window Films are not hurricane-proof, earthquake-proof, bullet-proof, bomb-proof, nor burglar-proof. Again, they are designed to make the window glass more shatter-resistant.
In the event of a windstorm, these films may have significant safety and security value. They can reduce the risk of injury from flying shards of broken glass, and possibly help prevent debris and water penetration through the window depending on the severity of the storm (and the type of glass, framing system, size and velocity of objects, and more).
In an earthquake, these films can reduce the risk of serious injury from flying shards of broken glass, and possible prevent glass from falling out of a home or building. Again, much may depend upon the severity of the quake (and the type of glass, framing system, and more, too).
Bullets: these films are not designed to stop bullets.
3M Safety & Security Window Films were originally developed to address international concerns and needs for improved safety and security against terrorist acts of bombings. These films can significantly reduce the risk of serious injury from flying shards of glass due to blasts, however, much depends upon the severity of the blast and the proximity of the window glass to the blast (and glass type, framing system, and more too).
3M Safety & Security Ultra Films are a low profile, high performance measure of security in the battle against 'smash and grab' crime. The tough, shatter-resistant qualities of the film can hold the window glass together even if a brick (or similar object) were actually to pass through the glass. The thief must now make a choice; continue to attack this window, try another window, or move on. Time is short, and often they move on. However, if they are determined to gain entry, they will get in. It is generally recommended that the property have proper alarm systems in addition to Scotchshield ultra Window Film.
Will 3M Safety & Security Window Film keep my glass from breaking?
This is difficult to answer with any degree of certainty because it is difficult to test for this. Window glass varies in strength from piece to piece, and lot to lot. So, if a 3M Safety & Security protected window were impacted, yet, failed to break, it would be difficult to determine if the glass alone, the film alone, or the film and glass together resisted the breakage.
When glass breaks, 3M Safety & Security Window Film demonstrates its best performance!
Does 3M make Sun Control and Safety & Security Window Films?
No one has more experience with Window Film than 3M. In fact, not only did 3M issue the very first patent on 3M Window Film in 1966, but today we're still the only manufacturer that produces our own raw materials such as polyesters, adhesives, metals and scratch-resistant coatings. This gives us the quality control and product consistency other manufacturers just can't match.
What's more, we have a core of carefully screened authorized dealers who are trained by 3M to professionally install your 3M Window Film correctly. And 3M Window Film is backed by a warranty that covers 100% of materials and labor.* It's the most comprehensive warranty you can get.
That, along with 3M's worldwide reputation as the adhesive experts, means you can rest assured knowing 3M Window Film is safe for your windows, and safe for you.
CALL 410-881-0362 TODAY!
We'll be happy to answer any questions you have.
WHY CHOOSE US?
Lifetime Warranty On All Work
100% Satisfaction Guaranteed
Energy Conservation Experts
Fully Licensed & Insured
Monday: 8:00 AM to 5:00 PM
Tuesday: 8:00 AM to 5:00 PM
Wednesday: 8:00 AM to 5:00 PM
Thursday: 8:00 AM to 5:00 PM
Friday: 8:00 AM to 5:00 PM
Saturday: By Appointment
Sunday: By Appointment